B-values (25/85) depending on R(25°C): 3,435 K, 3,977 K, 4,262 K
Accuracy: Customizable between ± 1% to ± 10%
Design:
Total height: max. 0.5 mm
Lengths: 15, 25, 50, 75 mm
Operating temperature range: -30°C to 90°C
Approvals: UL approval for certain curves
TA-4 Series
Epoxy-resin encapsulated NTC thermistor with insulated lead wires
R/T Characteristic:
Very large portfolio of standard and customer-specific R/T curves
Nominal resistance R(25°C) customizable: 1 kΩ to 500 kΩ
B-values (25/85) depending on the R(25°C) value: 3,100 K to 5,000 K
Accuracy:
Point-matched NTC with high accuracy in between ± 1% to ± 10%,
smaller tolerances possible on customer demand
OR
Interchangeable NTC with very high accuracy of e.g. ± 0,1 K in between 0°C to 90°C,
customer-specific customization of interval and accuracy possible
Design:
Sensor head diameter: Depends on the gauge of the lead wires, e.g. head diameter 2.4 mm with a wire gauge of AWG 30
Lead wires: Customization with wire gauges of AWG 32 (0.032 mm²) to AWG 24 (0,23mm²),
single leads of different lengths or double-leads,
wire insulation depends on the operating temperature range.
Optionally wire endings can be stripped and tinned, not stripped or crimp contacts.
Operating temperature range: -50°C to 150°C
Approvals: UL approval for certain curves
TS Series
Miniature-NTC thermistor with insulated solid wire leads and epoxy-resin encapsulation
R/T Characteristic:
Very large portfolio of standard and customer-specific R/T curves
Nominal resistance R(25°C) customizable: 1 kΩ to 500 kΩ
B-values (25/85) depending on the R(25°C) value: 3,100 K to 5,000 K
Accuracy:
Point-matched NTC with high accuracy in between ± 1% to ± 10%,
smaller tolerances possible on customer demand
OR
Interchangeable NTC with very high accuracy of e.g. ± 0,1 K in between 0°C to 90°C,
customer-specific customization of interval and accuracy possible
Design:
Sensor head diameter: Standard 1.6 mm
Lead wires: Insulated solid wires, stripped and tinned lead endings
Operating temperature range: -30°C to 150°C
HAT Series
Epoxy-resin encapsulated NTC thermistor for through-hole-assembly to PCB
R/T Characteristic:
Very large portfolio of standard and customer-specific R/T curves
Nominal resistance R(25°C) customizable: 1 kΩ to 500 kΩ
B-values (25/85) depending on the R(25°C) value: 3,100 K to 5,000 K
Accuracy: Point-matched NTC with high accuracy in between ± 1% to ± 10%,
smaller tolerances possible on customer demand
Design:
Measurements of sensor head: Width up to 4.0 mm, height up to 4.0 mm, depth up to 3.5 mm
Lead wires: Tinned solid wires made of copper, diameter of 0.5 mm
Pitch: 2.54 mm
Operating temperature range: Standard -30°C to 110°C, optional -50°C to 125°C
HT Series
Epoxy-resin encapsulated NTC thermistor with Ø 0.5 mm solid wire leads
R/T Characteristic:
Very large portfolio of standard and customer-specific R/T curves
Nominal resistance R(25°C) customizable: 1 kΩ to 500 kΩ
B-values (25/85) depending on the R(25°C) value: 3,100 K to 5,000 K
Accuracy: Point-matched NTC with high accuracy in between ± 1% to ± 10%,
smaller tolerances possible on customer demand
Design:
Measurements of sensor head: Width up to 4.0 mm, height up to 4.0 mm, depth up to 3.5 mm
Lead wires: Tinned solid wires made of copper, diameter of 0.5 mm
Pitch: 2.54 mm
Operating temperature range: Standard -30°C to 110°C, optional -50°C to 125°C
Optional packing: available on reel
PM Series
Epoxy-resin encapsulated NTC thermistor with non-insulated solid wire leads
R/T Characteristic:
Very large portfolio of standard and customer-specific R/T curves
Nominal resistance R(25°C) customizable: 1 kΩ to 500 kΩ
B-values (25/85) depending on the R(25°C) value: 3,000 K to 5,000 K
Accuracy: Point-matched NTC with high accuracy in between ± 1% to ± 10%,
smaller tolerances possible on customer demand
Design:
Head diameter: Standard 2.4 mm, smaller diameter possible
Lead wires: Tinned solid wire made from copper or copper alloy from AWG 26 to 36
Operating temperature range: Standard -40°C to +150°C, optional -50°C to +150°C
Approvals: UL approval for certain curves
IN Series
High precision (interchangeable) NTC thermistor with non-insulated solid wire leads and Epoxy-resin encapsulation
R-T-Characteristic:
Very large portfolio of standard and customer-specific R-T-curves
Nominal resistance R(25°C) customizable: 1 kΩ to 1 MΩ
B-values (25°C;85°C) depending on the R(25°C) value: 3.100 K to 5.000 K
Accuracy: interchangeable NTC with very high accuracy of e.g. ± 0,1 K in a range of up to 100 K.
Customer-specific customization of range and accuracy are possible
Design:
Head diameter: Standard 2,4 mm, smaller diameters possible of down to 2,0 mm
Lead wires: tinned solid wire made from copper or copper alloy from AWG 28 to 32