TU COMBI

 

  • Thermal control  thermal cut-out
  • Incorporated thermostat TU series
    Contact form: Single pole single throw, open on temperature rise, or double-throw.
    Adjusting temperature range: +30 to +90°C.
  • Incorporated thermal cut-out TU.RM FS series
    Thermal cut-out with fail-safe sensing system (Type 2K in accordance to EN 60 730)
    Contact form: Single pole single throw, open on temperature rise, manual reset
  • Calibration OFF temperature: +97°C
    Calibration factory pre-set
  • Contact rating (per pole):
    16 A 250 VAC (resistive load)
    5 A 250 VAC (inductive load)
  • Thermal control and thermal cut-out connected in series
  • Plastic case with thermowell and cable gland
    Internal termination: Quick connect terminals 6,3x0m,8 mm (Standard) or screw terminals.
    Max. switch head temperature: 80°C,
    Protection Class: IP40,
    Colour of case: Brown, white or orange.
    Colour of knob and cap: White or black.
  • Thermowell:
    Material: Copper,
    Thread: Brass, ½“ NPT,
    Diameter: 8mm,
    Length without thread: 90 mm (Standard), optional longer thermowell available.
  • Approvals: CE, incorporated thermostat only: ENEC (EN 60 730-1 and EN 60 730-2-9)

 

TS.SC

 

  • Pipe-Mount Temperature Limiter with Capillary Sensor
    Thermal cut-out (Type 2B in accordance to EN 60 730)
  •  Incorporated temperature limiter TS-RM series
    Contact form: Single pole single throw, open on temperature rise, or double-throw, manual reset
    Contact rating (open on rise switch):
    16 A 250 VAC (resistive load)
    5 A 250 VAC (inductive load)
    Contact rating (open on rise switch):
    0,5 A 250 VAC (resistive load)
  • Calibration OFF temperature can be set from +40°C to +110°C
  • Calibration factory pre-set
  • Plastic case with thermowell and cable gland
    Internal termination: Quick connect terminals 6,3×0,8 mm or screw terminals (Standard).
    Max. switch head temperature: 80°C,
    Protection Class: IP40,
    Colour of case: White, brown or orange,
    Colour of cap: White or black,
    Assembly with fitting spring to pipes with a diameter of 3/4″ to 3″.
  • Sensing Element:
    Material: Stainless steel,
  • Approvals: CE, incorporated thermostat only: ENEC (EN 60 730-1 and EN 60 730-2-9)

TU.SC

 

  • Pipe mount thermostat (thermal control) with capillarry sensing element
  • Incorporated thermostat TU series
    Contact form: Single pole single throw, open on temperature rise, or double-throw.
    Rated load:
    16 A 250 VAC (resistive load),
    5 A 250 VAC (inductive load),
    Adjusting temperature range: 30 to 90°C
    Differential: 4 K
  • Plastic case with thermowell and cable gland
    Internal termination: Quick connect terminals 6,3×0,8 mm or screw terminals (Standard).
    Max. switch head temperature: 80°C,
    Class II Control,
    Protection Class: IP40,
    Colour of case: White, brown or orange,
    Colour of knob: White or black,
    Assembly with fitting spring to pipes with a diameter of 3/4″ to 3″.
  • Sensing Element:
    Material: Stainless steel,
  • Approvals: CE, incorporated thermostat only: ENEC (EN 60 730-1 and EN 60 730-2-9), UL

TU.SA IP54

 

  • Thermostat, thermal control
  • Incorporated thermostat TU series
    Contact form: Single pole single throw, open on temperature rise, or double-throw.
    Rated load:
    16 A 250 VAC (resistive load),
    5 A 250 VAC (inductive load),
    Adjusting temperature range: -5 to 35°C, 0 to 40°C or 20 to 60°C
  • Plastic case with thermowell and cable sleeve
    Internal termination: Quick connect terminals 6,3×0,8 mm or screw terminals (Standard).
    Max. switch head temperature: 80°C,
    Class II Control,
    Protection Class: IP54,
    Colour of case:  Grey/Orange
    Colour of knob: Orange
  • Sensing Element:
    Material: Stainless steel,
    Diameter: 30 mm
  • Approvals: CE, incorporated thermostat only: ENEC (EN 60 730-1 and EN 60 730-2-9), UL

TU.10 B

 

  • Thermostat, thermal control, or temperature limiter
  • Incorporated thermostat TU series
    Contact form: Single pole single throw, open on temperature rise, or double-throw.
    Rated load:
    16 A 250 VAC (resistive load),
    5 A 250 VAC (inductive load),
    Adjusting temperature range: 0 to 60°C, 30 to 90°C, 30 to 110°C.
  • Plastic case with thermowell and cable gland
    Internal termination: Quick connect terminals 6,3x0m,8 mm (Standard) or screw terminals.
    Max. switch head temperature: 80°C,
    Protection Class: IP40,
    Colour of case: Brown, white or orange.
    Colour of knob: White or black.
  • Thermowell:
    Material: Copper,
    Thread: Brass, ½“ NPT,
    Diameter: 8mm,
    Length without thread: 90 mm (Standard), optional longer thermowell available.
  • Approvals: CE, incorporated thermostat only: ENEC (EN 60 730-1 and EN 60 730-2-9), UL

TU.SA IP40

 

  • Thermostat, thermal control
  • Incorporated thermostat TU series
    Contact form: Single pole single throw, open on temperature rise, or double-throw.
    Rated load:
    16 A 250 VAC (resistive load),
    5 A 250 VAC (inductive load),
    Adjusting temperature range: 4 to 40°C
    Differential: 1,5 K
  • Plastic case with thermowell and cable sleeve
    Internal termination: Quick connect terminals 6,3×0,8 mm or screw terminals (Standard).
    Max. switch head temperature: 80°C,
    Class II Control,
    Protection Class: IP40,
    Colour of case: White
    Colour of knob: White or black
  • Sensing Element:
    Material: Stainless steel,
    Diameter: 30 mm
  • Approvals: CE, incorporated thermostat only: ENEC (EN 60 730-1 and EN 60 730-2-9), UL

TU.RM B FS

 

  • Thermal cut-out
  • Incorporated thermostat TU.RM FS series
    Thermal cut-out with fail-safe sensing system (Type 2K in accordance to EN 60 730)
    Contact form: Single pole single throw, open on temperature rise, manual reset
    Contact rating (per pole):
    16 A 250 VAC (resistive load)
    5 A 250 VAC (inductive load)
    Calibration OFF temperature can be set from +40°C to +110°C
    Calibration factory pre-set
  • Plastic case with thermowell and cable gland
    Internal termination: Quick connect terminals 6,3x0m,8 mm (Standard) or screw terminals,
    Max. switch head temperature: 80°C,
    Protection Class: IP40,
    Colour of case: Brown, white or orange,
    Colour of cap: White or black.
  • Thermowell:
    Material: Copper,
    Thread: Brass, ½“ NPT,
    Diameter: 8mm,
    Length without thread: 90 mm (Standard), optional longer thermowell available.
  • Approvals: CE, incorporated thermostat only: ENEC (EN 60 730-1 and EN 60 730-2-9)

TU.RM FS

 

  • Thermal cut-out with fail-safe sensing system (Type 2K in accordance to EN 60 730)
    Contact form: Single pole single throw, open on temperature rise, manual reset
    Contact rating (per pole):
    16 A 250 VAC (resistive load)
    5 A 250 VAC (inductive load)
    Calibration OFF temperature can be set from +40°C to +335°C
    Calibration factory pre-set
  • Max. switch head temperature: +150°C
  • Sensing system:
    Standard length of capillary 900 mm or customer specific.
    Material: Copper or stainless steel.
    Bulb diameter: 3, 4, 5 or 6 mm.
    Sensor length is customizable depending on material, diameter, and adjustable temperature range.
    Diverse isolation tube materials (i.e. PVC or silicone-fiber glass) for the capillary tube.
  • Approvals: ENEC in accordance to EN 60 730-1 und EN 60 730-2-9

TU.RM

 

  • Thermal cut-out (Type 2B in accordance to EN 60 730)
  • Contact form: single pole (SPST), open on temperature rise, manual reset
  • Contact rating (per pole):
    20 A 240 VAC (resistive load)
    2,9 A 240 VAC (inductive load)
  • Calibration OFF temperature can be set from +40°C to +400°C
  • Calibration factory pre-set
  • Sensing system:
    Standard length of capillary 900 mm or customer specific.
    Material: Copper or stainless steel.
    Bulb diameter: 3, 4, 5 or 6 mm.
    Sensor length is customizable depending on material, diameter, and adjustable temperature range.
    Diverse isolation tube materials (i.e. PVC or silicone-fiber glass) for the capillary tube.
  • Approvals: ENEC in accordance to EN 60 730-1 und EN 60 730-2-9, UL

DPL/MR

 

  • Thermal cut-out with fail-safe sensing system (Type 2K in accordance to EN 60 730)
  • Contact form: double pole (2PST), open on temperature rise, manual reset
  • Contact rating (per pole):
    20 A 250 VAC (resistive load)
    10 A 400 VAC (resistive load)
  • Calibration OFF temperature can be set from +85°C to +110°C
  • Caibration factory pre-set
  • Max. switch head temperature: +90°C
  • Sensing system:
    Standard length of capillary 900 mm or customer specific.
    Material: Copper or stainless steel.
    Bulb diameter: 3, 4, 5 or 6 mm.
    Sensor length is customizable depending on material, diameter, and adjustable temperature range.
    Diverse isolation tube materials (i.e. PVC or silicone-fiber glass) for the capillary tube.
  • Approvals: UL

Contact us

Rissener Landstraße 265
22559 Hamburg
Germany

Phone: +49–(0)40–819 000–0
Fax: +49 (0)40–819 000–5

verkauf@thermonie.de